Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-294001.png)
Wiper Switch: Service and Repair
REMOVAL
1. REMOVE STEERING COLUMN COVER LOWER
2. REMOVE STEERING COLUMN COVER UPPER
3. REMOVE WIPER SWITCH
a. Disconnect the connector.
b. Disengage the claw and remove the wiper switch.
NOTE:
If the claw is pushed with excessive force, it may be broken.
INSTALLATION
1. INSTALL WIPER SWITCH
a. Install the wiper switch with the claw. b. Connect the connector.
2. INSTALL STEERING COLUMN COVER UPPER
3. INSTALL STEERING COLUMN COVER LOWER
