Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
7. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
a. Remove the 2 nuts and the front stabilizer link assembly LH.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.
8. REMOVE FRONT STABILIZER LINK ASSEMBLY RH
a. Remove the 2 nuts and the front stabilizer link assembly RH.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.
9. REMOVE FRONT NO.1 STABILIZER BRACKET LH
a. Remove the 2 bolts and the front stabilizer bracket No. 1 LH from the front frame assembly
10. REMOVE FRONT NO.1 STABILIZER BRACKET RH
a. Remove the 2 bolts and the front stabilizer bracket No. 1 RH from the front frame assembly.
11. REMOVE FRONT NO.2 STABILIZER BRACKET LH
a. Remove the front stabilizer bracket No.2 LH from the front stabilizer bar bushing No. 1.
12. REMOVE FRONT NO.2 STABILIZER BRACKET RH
a. Remove the front stabilizer bracket No.2 RH from the front stabilizer bar bushing No. 1.
13. REMOVE FRONT NO.1 STABILIZER BAR BUSHING
a. Remove the 2 front stabilizer bar bushings No. 1 from the front stabilizer bar.
14. REMOVE FRONT NO.3 EXHAUST PIPE SUB ASSEMBLY
15. REMOVE FRONT EXHAUST PIPE
16. REMOVE MANIFOLD STAY
a. Remove the bolt, nut and the manifold stay
17. REMOVE POWER STEERING LINK
18. REMOVE FRONT STABILIZER BAR
a. Remove the front stabilizer bar from the right side of the vehicle.
INSPECTION