Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-1193002.png)
5. INSTALL REAR AXLE HUB BOLT
a. Install a washer and nut to a new bolt, as shown in the illustration.
b. Using a brass bar or an equivalent to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
6. INSTALL REAR DISC
7. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY
8. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
