Highlander 2WD V6-3.5L (2GR-FE) (2008)
(a) Engage the 4 claws, and install the side trim cover RH.
67. INSTALL DECK SIDE TRIM RH
HINT: Use the same procedure for the RH side and the LH side.
68. INSTALL DECK SIDE TRIM COVER RH
HINT: Use the same procedure for the RH side and the LH side.
69. INSTALL REAR SEAT SIDE GARNISH CAP (w/o Rear Air Conditioning System)
(a) Engage the guide and the 8 claws, and install the rear seat side garnish cap.
70. INSTALL REAR SEAT SIDE GARNISH CAP (w/ Rear Air Conditioning System)
(a) Engage the guide and the 6 claws.
(b) Install the rear seat side garnish cap with the screw.
71. INSTALL REAR FLOOR FINISH PLATE
(a) Engage the 4 clips and the 4 claws, and install the rear floor finish plate.
72. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat) See: Seats/Service and Repair/Rear No. 2 Seat Assembly/Installation
73. CONNECT REAR SEAT LAP TYPE BELT ASSEMBLY LH (w/ Rear No. 2 Seat) See: Restraint Systems/Seat Belt Systems/Seat Belt/Service
and Repair/Rear No. 2 Seat Outer Belt Assembly/Installation