Highlander 2WD V6-3.5L (2GR-FE) (2008)
Parking Brake Pedal: Service and Repair
Installation
PARKING BRAKE: PARKING BRAKE PEDAL: INSTALLATION
INSTALLATION
1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY
(a) Install the parking brake control pedal assembly with the 3 nuts.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
(b) Connect the parking brake switch connector.
(c) Insert the No. 1 parking brake cable assembly toward the outside of the cabin.