Highlander 2WD V6-3.5L (2GR-FE) (2008)
6. INSTALL INTAKE AIR SURGE TANK ASSEMBLY See: Intake Manifold/Service and Repair/Installation
7. FULLY TIGHTEN NO. 1 SURGE TANK STAY See: Intake Manifold/Service and Repair/Installation
8. FULLY TIGHTEN THROTTLE BODY BRACKET See: Intake Manifold/Service and Repair/Installation
9. CONNECT ENGINE ROOM MAIN WIRE See: Intake Manifold/Service and Repair/Installation
10. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair/Installation
11. ADD ENGINE COOLANT See: Cooling System/Coolant/Service and Repair
12. INSPECT FOR COOLANT LEAK See: Cooling System/Testing and Inspection
13. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY
14. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
15. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
16. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
17. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH
18. INSTALL V-BANK COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
19. INSTALL NO. 1 ENGINE UNDER COVER See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
20. INSTALL ENGINE UNDER COVER ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation