Highlander 2WD V6-3.5L (2GR-FE) (2008)
(a) Disconnect the 2 vacuum hoses, and remove the 2 bolts and No. 1 air cleaner inlet.
5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
(a) Disconnect the 3 vacuum hoses.
(b) Loosen the No. 1 air cleaner hose clamp.
(c) Disconnect the hose clamps and No. 2 ventilation hose.
(d) Disconnect the mass air flow meter connector.
(e) Release the 2 clips, and remove the 2 bolts.
(f) Remove the air cleaner cap sub-assembly and air cleaner filter element.
6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
(a) Remove the 3 bolts, disconnect the hose and the connector, and remove the air cleaner case sub-assembly.
7. REMOVE NO. 3 INTAKE AIR CONTROL VALVE ASSEMBLY