Highlander 2WD V6-3.5L (2GR-FE) (2008)
Washer Fluid Level Switch: Service and Repair
Installation
WIPER AND WASHER: WASHER LEVEL WARNING SWITCH: INSTALLATION
INSTALLATION
1. INSTALL LEVEL WARNING SWITCH ASSEMBLY
(a) Install the level warning switch assembly.
(b) Connect the connector.
2. FILL WASHER JAR WITH WASHER FLUID
(a) Connect the washer hose to the front washer motor and pump assembly and fill the washer jar with washer fluid.
3. INSTALL FRONT FENDER LINER RH See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Installation
4. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH
5. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog Light) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Installation
6. INSTALL FRONT BUMPER ASSEMBLY (w/ Fog Light) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Installation
7. INSTALL RADIATOR GRILLE See: Body and Frame/Grille/Service and Repair/Installation
8. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Grille/Service and Repair/Installation
9. INSTALL NO. 1 ENGINE UNDER COVER
10. INSTALL ENGINE UNDER COVER ASSEMBLY
11. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light) See: Lighting and Horns/Fog/Driving
Lamp/Adjustments
12. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) See: Lighting and Horns/Fog/Driving Lamp/Adjustments