Highlander 2WD V6-3.5L (2GR-FE) (2008)
Wiper Switch: Service and Repair
Removal
WIPER AND WASHER: WIPER SWITCH: REMOVAL
REMOVAL
1. REMOVE STEERING COLUMN COVER
(a) Turn the steering wheel assembly to the right and remove the screw as shown in the illustration.
(b) Turn the steering wheel assembly to the left and remove the screw as shown in the illustration.
(c) Disengage the 2 claws and remove the lower steering column cover.
(d) Disengage the claw and remove the upper steering column cover.
2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Disconnect the 2 connectors.
(b) Disengage the claw and remove the windshield wiper switch assembly.