Highlander 2WD V6-3.5L (2GR-FE) (2008)
8. INSTALL REAR STABILIZER LINK ASSEMBLY RH
HINT: Perform the same procedure as the LH side.
9. INSTALL REAR WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
10. INSTALL SPARE WHEEL CARRIER LOCK COVER (w/ Cover)
11. INSTALL SPARE TIRE
12. INSTALL LOWER SPARE WHEEL CARRIER HINGE COVER (w/ Cover)
13. INSTALL DECK TRIM SERVICE HOLE COVER
14. INSTALL REAR MAT See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
16. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY (w/ Tonneau Cover) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
17. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Tonneau Cover) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
18. INSTALL DECK BOARD ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
19. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
HINT: See: Alignment/Service and Repair