Highlander 2WD V6-3.5L (2GR-FE) (2008)
Transmission Cooler: Service and Repair
Installation
U151E AUTOMATIC TRANSAXLE: AIR COOLED OIL COOLER: INSTALLATION
INSTALLATION
1. INSTALL OIL WITH HOSE COOLER ASSEMBLY
(a) Install the oil with hose cooler assembly with the bolt and the nut.
Torque: 7.0 Nm (71 kgf-cm, 62 in-lbf)
HINT: After temporarily tightening the bolt, fully tighten the nut and then bolt.
(b) Connect the 2 oil cooler hoses and install the 2 hose clamps.
2. INSTALL FRONT BUMPER ASSEMBLY
3. ADD AUTOMATIC TRANSAXLE FLUID
4. INSPECT AUTOMATIC TRANSAXLE FLUID See: Service and Repair/Procedures
5. INSPECT FOR TRANSAXLE FLUID LEAK