Highlander 4WD L4-2.4L (2AZ-FE) (2001)
b. Apply seal packing to 2 locations as shown in the illustration.
Seal packing: Part No. 08826-00080 or equivalent
NOTICE:
-
Remove any oil the contact surface.
-
Install the cylinder head cover within 5 minutes after applying seal packing.
-
Do not put into engine oil 2 hours after installing.
c. Install the cylinder head cover with the 8 bolts and 2 nuts.
Torque:
Bolt A 11 Nm (110 kgf-cm, 8 ft. lbs.)
Bolt B 14 Nm (143 kgf-cm, 10 ft. lbs.)
Nut 11 Nm (110 kgf-cm, 8 ft. lbs.)
19. INSTALL IGNITION COIL ASSY [19500 / 98-34]
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
20. INSTALL FRONT WHEEL RH
Torque: 103 Nm (1050 kgf-cm, 76 ft. lbs.)
21. INSPECT OIL LEAK