Highlander 4WD L4-2.4L (2AZ-FE) (2001)
38. INSTALL POWER STEERING RACK
a. Install SST to the steering rack.
SST 09631-33010
HINT: If necessary, scrape the burrs off the steering rack teeth end and burnish.
b. Coat the SST with power steering fluid.
c. Install the steering rack into the rack housing.
d. Remove the SST.
39. INSTALL POWER STEERING RACK BUSH
a. Using SST and a press, install the rack bush to the steering rack.
SST 09950-60010 (09951-00400), 09950-70010 (09951-07100)
NOTICE: Make sure that the oil seal Is installed facing in the correct direction.
b. Coat a new O-ring with power steering fluid and install it to the rack bush.
c. To prevent oil seal lip damage, wind vinyl tape around the steering rack end, and apply power steering fluid.
d. Install the rack bush to the steering rack.
NOTICE: Make sure that the oil seal is installed facing in the correct direction.