Highlander 4WD V6-3.0L (1MZ-FE) (2003)
/Page-1134003.png)
1. Press and hold the 2 switches at both ends of the garage door opener simultaneously for 20 seconds. Then, the LED starts flashing at a
cycle of 5.6 Hz. Releasing the switches will end clear mode.
Timing Chart of Clear Mode:
b. Low power mode:
1. If the switch of the garage door opener is held for 100 seconds or more, the garage door opener will enter into low power mode to
economize the power consumption. When the garage door opener has entered into low power mode, the LED goes off.
