Highlander 4WD V6-3.0L (1MZ-FE) (2003)
Trunk / Liftgate Shock / Support: Removal and Replacement
REPLACEMENT
HINT:
-
Installation is in the reverse order of the removal. But, the installation is indicated only when it has a point.
-
In the LH side, work in the same procedure as in the RH side.
1. REMOVE BACK DOOR STAY ASSEMBLY LH
a. Remove the 4 bolts and back door stay from the back door panel.
HINT: While supporting the back door by hand, remove the back door stay.
2. INSTALL BACK DOOR STAY ASSEMBLY LH
a. Install the back door stay with the 4 bolts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)