Highlander 4WD V6-3.0L (1MZ-FE) (2003)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Actuator
REPLACEMENT
1. DRAIN BRAKE FLUID
NOTICE: Do not let brake fluid remain on a painted surface. Wash it off immediately.
2. REMOVE AIR CLEANER ASSEMBLY WITH HOSE
3. REMOVE BRAKE ACTUATOR WITH BRACKET
a. Using SST, disconnect the 6 brake lines from the actuator.
SST 09023-00100
b. Use tags or make a memo to identify the place to reconnect.
c. Using SST, disconnect the brake lines from the master cylinder, then remove the 2 brake lines.
SST 09023-00100
d. Disconnect the brake actuator connector.