Highlander 4WD V6-3.0L (1MZ-FE) (2003)
a. Remove the 2 bolts, and disconnect the parking brake cable No. 3 from the backing plate.
b. Loosen the lock nut, and rotate the turn buckle to disconnect the parking brake cable No. 2 and No. 3.
7. REMOVE PARKING BRAKE CABLE ASSY NO.3
a. Remove the bolt, 4 nuts and parking brake cable No. 3.
8. INSTALL PARKING BRAKE CABLE ASSY NO.3
a. Install the parking brake cable No. 3 with the bolt and 4 nuts.
Torque:
8.0 Nm (82 kgf-cm, 71 inch lbs.) for Bolt
5.0 Nm (51 kgf-cm, 44 inch lbs.) for Nut
9. CONNECT PARKING BRAKE CABLE ASSY NO.3