Highlander 4WD V6-3.0L (1MZ-FE) (2003)
b. In case of repairing the timing belt cover gasket, follow the procedure.
1
Repair the crack and break portion applying the seal packing.
Seal packing: Part No. 08826-00080 or equivalent
NOTICE: In case of applying the seal packing, apply it as wide and high as the gasket.
c. In case of replacing the timing belt cover gasket, follow the procedure.
1
Using a screwdriver and gasket scraper, remove the remained gasket.
NOTICE: Be careful not to damage the timing belt cover.
2
Remove the backing paper from a new gasket, and affix the gasket along the groove of the timing belt cover as shown in the illustration.
NOTICE:
-
Affix the gasket in the center of the groove.
-
At the corner, affix it without making the thickness of the gasket length.
HINT:
3
In case of having clearance at the joining portion of the gasket, apply the seal packing.
Seal packing: Part No. 08826-00080 or equivalent
NOTICE: In case of applying the seal packing, apply it as wide and high as the gasket.
d. Install the timing belt cover with the 6 bolts.
Torque: 8.5 Nm (87 kgf-cm, 76 inch lbs.)
35. INSTALL CAMSHAFT TIMING PULLEY