Highlander 4WD V6-3.0L (1MZ-FE) (2003)
/Page-1015004.png)
10. INSTALL COOLER REFRIGERANT LIQUID PIPE A
[88716A /98-191]
a. Remove the attached vinyl tape from the pipe and condenser assembly.
b. Install a new O-ring to the cooler refrigerant liquid pipe A.
c. Sufficiently apply compressor oil to the O-ring and pipe joint.
Compressor oil: ND-OIL 8 or equivalent
d. Connect the cooler refrigerant liquid pipe A to the condenser assembly with the bolt.
Torque: 5.4 N.m (55 kgf.cm, 47 in.lbf)
11. INSTALL COOLER REFRIGERANT DISCHARGE PIPE A
[88715A /98-191]
a. Remove the attached vinyl tape from the tube and connecting part of the condenser assembly.
b. Install a new O-ring to the cooler refrigerant discharge tube.
c. Sufficiently apply compressor oil to the O-ring and tube joint.
Compressor oil: ND-OIL 8 or equivalent
d. Connect the cooler refrigerant liquid pipe A to the condenser assembly with the bolt.
Torque: 5.4 N.m (55 kgf.cm, 47 in.lbf)
12. CHARGE REFRIGERANT
SST 07110-58060 (07117-58060, 07117-58070, 07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080)
Specified amount: 650 ± 50 g (22.93 ± 1.76 oz.)
13. WARM UP ENGINE
14. INSPECT LEAKAGE OF REFRIGERANT
