Highlander 4WD V6-3.0L (1MZ-FE) (2003)
h. Remove the 3 nuts, throttle body and gasket.
5. REMOVE THROTTLE BODY NO.2
a. Remove the 2 screws and cover.
b. Remove the 3 screws and the throttle body No.2.
c. Remove the vacuum hose.
NOTE: Do not disassemble or adjust the throttle opener.
6. REMOVE THROTTLE BODY
a. Remove the 3 screws and throttle body.
7. REMOVE THROTTLE POSITION SENSOR
a. Remove 2 screws and throttle position sensor.