Highlander 4WD V6-3.0L (1MZ-FE) (2003)
32. REMOVE POWER STEERING CYLINDER TUBE OIL SEAL
a. Using SST and a press, remove the oil seal.
SST 09950-70010 (09951-07360), 09950-60010 (09951-00290)
33. REMOVE POWER PISTON OIL SEAL
a. Using a screwdriver, remove the oil seal and O-ring.
NOTICE: Be careful not to damage the grooves for oil seal.
34. INSTALL POWER PISTON OIL SEAL
a. Coat a new O-ring with power steering fluid and install it to the steering rack.
b. Expand a new oil seal with your fingers.
NOTICE: Be careful not to over expand the oil seal.
c. Coat a new oil seal with power steering fluid.
d. Install the oil seal to the steering rack, and settle it down with your fingers.