Highlander 4WD V6-3.0L (1MZ-FE) (2003)
71. INSTALL REAR DIFFERENTIAL CARRIER OIL SEAL
a. Using SST and a hammer, install a new oil seal.
SST 0955-22010
Oil seal drive in depth: 2.0 ± 0.3 mm (0.079 ± 0.012 inch)
b. Coat MP grease to the oil seal lip.
72. INSTALL REAR DIFFERENTIAL DUST DEFLECTOR
a. Using SST and a press, install a new dust deflector.
SST 09223-00010
NOTICE: Be careful not to damage the dust deflector.
73. INSTALL REAR DRIVE PINION COMPANION FLANGE SUB-ASSY REAR
a. Using SST, install the companion flange on the drive pinion.
SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020)
b. Coat the threads of a new nut with hypoid gear oil LSD.
c. Using SST to hold the flange, torque the nut.
SST 09330-0021
Torque: 108 Nm (1,100 kgf-cm, 80 ft. lbs.)
74. INSPECT DIFFERENTIAL DRIVE PINION PRELOAD