Highlander 4WD V6-3.3L (3MZ-FE) (2004)
REPLACEMENT
HINT:
-
Installation is in the reverse order of removal.
1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSY
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
3. REMOVE DOOR PULL HANDLE
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSY LH
5. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSY LH
6. REMOVE FRONT NO.1 SPEAKER ASSY
a. Disconnect the connector.
b. Remove the 3 screws and front No.1 speaker assy.
7. INSTALL FRONT NO.1 SPEAKER ASSY
a. Install the front No.1 speaker assy with the 3 screws.
b. Connect the connector.