Highlander 4WD V6-3.3L (3MZ-FE) (2004)
* Warranty application is limited to correction of a problem based upon a customer's specific complaint.
Required SSTs
Repair Procedure
1.
Check for ABS/VSC DTCs using the Diagnostic Tester.
2.
If ABS/VSC DTC(s) are present, then follow diagnostics for specific DTC(s).
3.
If no ABS/VSC DTC(s) are present, then remove and replace the steering angle sensor following the procedures outlined in the Technical
Information System (TIS), 2004 model year Highlander or Sienna Repair Manual: Brake, Steering Sensor.
4.
Perform Zero Point Calibration. Refer to TSB No. BR001-04, "Zero Point Calibration."
5.
Road test vehicle.
Required SSTs
Repair Procedure