Highlander 4WD V6-3.3L (3MZ-FE) (2004)
/Page-276002.png)
a. Install the belt on each pulley.
b. Tighten adjusting bolt C, and adjust the belt tension.
c. First tighten bolt A, and then B.
Torque:
58 Nm (591 kgf-cm, 43 ft. lbs.) for bolt A
18 Nm (184 kgf-cm, 13 ft. lbs.) for bolt B
8. INSPECT DRIVE BELT TENSION
9. INSTALL FRONT WHEEL RH
