Highlander 4WD V6-3.3L (3MZ-FE) (2004)
/Page-349003.png)
17. INSTALL REAR AXLE SHAFT LH NUT
(a) Install a new axle shaft LH nut. Torque: 294 Nm, (3,000 kgf cm, 217 ft.lbf)
(b) Using a chisel and a hammer, stake the axle shaft LH nut.
18. INSTALL SPEED SENSOR REAR LH
19. INSTALL REAR WHEEL
20. CHECK ABS SPEED SENSOR SIGNAL
