Highlander 4WD V6-3.3L (3MZ-FE) (2004)
Evaporative Check Valve: Service and Repair
REPLACEMENT
1. REMOVE VENTILATION VALVE SUB-ASSY
a. Disconnect the ventilation hose from the ventilation valve.
b. Remove the ventilation valve.
2. INSTALL VENTILATION VALVE SUB-ASSY
a. Install the ventilation valve.
1. Apply adhesive to 2 or 3 threads.
Adhesive: Part No. 08833-00070, THREE BOND 1324 or equivalent
2. Install the ventilation valve.
Torque: 19 N.m (193 kgf.cm, 14 ft.lbf)
b
Connect the ventilation hose to the ventilation valve.