Highlander 4WD V6-3.3L (3MZ-FE) (2004)
/Page-706003.png)
b. Disconnect the fuel tank vent hose hose.
1. Push the connector deep into the charcoal canister to release the locking tab.
2. Pinch portion A.
3. Pull out the connector.
c. Disconnect the fuel tank breather tube No.3.
1. Lower the connector checker slightly.
2. Pinch the tube connector.
3. Pull out the breather tube.
NOTE:
-
Before this operation, check the connector for dirt, mud or other contamination.Clean if necessary.
-
Be careful of mud.The connector's O-ring, which seals the pipe and connector, becomes contaminated easily.
-
Do not use any tool in this operation.
-
Do not bend or twist the nylon tube.Protect the connector by covering it with a vinyl or plastic bag.
-
When the pipe and connector are stuck, push and pull the connector to release it. Then pull out the connector from the pipe.
