Highlander 4WD V6-3.3L (3MZ-FE) (2004)
/Page-706005.png)
a. Unfasten the 2 claws and remove the tube.
19. REMOVE FUEL TANK TO FILLER PIPE HOSE
a. Loosen the hose clamp bolt and remove the hose.
20. REMOVE FUEL TANK WIRE
a. Disconnect the vapor pressure sensor connector.
b. Unfasten the 4 claws and remove the wire.
21. REMOVE VAPOR PRESSURE SENSOR ASSY
a. Remove the tube joint clip.
b. Pull out the vapor pressure sensor.
22. REMOVE FUEL TANK VENT HOSE
a. Push the connector deep into the charcoal canister to release the locking tab.
b. Pinch portion A.
