Highlander 4WD V6-3.3L (3MZ-FE) (2004)
Safing Sensor: Testing and Inspection
CAUTION: Be sure to perform the initialization of the occupant classification ECU if any of the following conditions occur. If the initialization is not
performed, the SRS may not operate properly.
-
The occupant classification ECU is replaced.
-
Accessories (seatback tray, seat cover, etc.) are installed to the vehicle.
-
The passenger seat is removed from the vehicle.
-
Both the SRS warning light and passenger airbag ON/OFF indicator light ("OFF") come on.
-
The vehicle is brought to the workshop for repair due to an accident or collision.
VEHICLE NOT INVOLVED IN COLLISION
a. Perform a diagnostic system check.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Perform a diagnostic system check.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
a. Replace the airbag sensor assy center.
HINT: The airbag sensor assy center should be replaced after any of the airbags has deployed, as it has been subjected to the impact.