Highlander 4WD V6-3.3L (3MZ-FE) (2004)
/Page-1098004.png)
4. SEPARATE TIE ROD ASSY RH
SST 09628-62011
HINT: Perform the same procedure as for the LH.
5. SEPARATE STEERING INTERMEDIATE SHAFT SUB-ASSY
(a) Fix the steering wheel with the seat belt in order to prevent rotation.
HINT: This operation is useful to prevent damage to the spiral cable.
(b) Loosen bolt A and remove the clamp from the steering column hole cover No.1.
(c) Separate the steering column hole cover No.2 from the steering column hole cover No.1.
(d) Loosen bolt B.
(e) Put matchmarks on the steering intermediate shaft sub- assy and the steering link assy.
(f) Remove the bolt and disengage the steering intermediate shaft sub-assy.
6. SEPARATE FRONT STABILIZER LINK ASSY LH
7. SEPARATE FRONT STABILIZER LINK ASSY RH
HINT: Perform the same procedure as for the LH.
