Highlander 4WD V6-3.3L (3MZ-FE) (2004)
/Page-1098005.png)
8. REMOVE FRONT STABILIZER BRACKET NO.1 LH
(a) Remove the 2 bolts, the stabilizer bracket No.1 LH and the stabilizer bracket No.2.
(b) Remove the stabilizer bar bush No.1 from the stabilizer bar.
9. REMOVE FRONT STABILIZER BRACKET NO.1 RH
HINT: Perform the same procedure as for the LH.
10. DISCONNECT RETURN TUBE ASSY
(a) Remove the tube clamp from the pressure feed tube assy.
(b) Using SST, disconnect the return tube assy from the steering link assy.
SST 09023-12700
(c) Remove the nut and the return tube clamp.
11. DISCONNECT PRESSURE FEED TUBE ASSY
(a) Using SST, disconnect the pressure feed tube assy from the steering link assy.
