Highlander 4WD V6-3.3L (3MZ-FE) (2004)
4WD Models
REAR SUSPENSION ARM ASSY NO.2 LH
REPLACEMENT
1. REMOVE REAR WHEEL
2. REMOVE REAR SUSPENSION ARM ASSY NO.2 LH
a. Support the rear axle carrier with a jack
b. Place matchmarks on the adjust cams and rear suspension member sub-assy.
c. Remove the nut, camber adjust cam and toe adjust cam, and disconnect the rear suspension arm assy No.2 (inner side).
NOTICE: When removing the nut, keep the bolt from rotating.