Highlander 4WD V6-3.3L (3MZ-FE) (2004)
5.
Remove the transfer drain plug and remove the gasket from the drain plug.
6.
Remove the transfer assembly.
A.
Remove the 2 bolts and 6 nuts.
B.
Using a plastic hammer, drive out the transfer assembly from the transaxle assembly.
^
Disconnect the transfer assembly from the transaxle assembly without tilting.
^
When moving the transfer assembly, do NOT hold the assembly by the oil seals.
7.
Remove the transfer cover gasket from the transfer assembly.
8.
Using the SST, remove the transfer RH bearing retainer oil seal.
^
SST P/N 09308-00010
NOTE:
Be careful NOT to damage the oil-seal-fitted surface of the retainer.