Highlander 4WD V6-3.3L (3MZ-FE) (2004)
11.
Install the automatic transmission w/transfer.
Refer to TIS:
^
2004 - 2005 model year Highlander Repair Manual, Drive train - Automatic Transmission/Transaxle - "U151E U151F OR U241E U140F:
Automatic Transaxle Assy: Replacement".
^
2006 model year Highlander Repair Manual, Drive train - Automatic Transmission/Transaxle - "U140F OR U151F Automatic Transaxle:
Automatic Transaxle Assembly: Reassembly".
^
2004 - 2005 model year Sienna Repair Manual, Drive train - Automatic Transmission/Transaxle - "U151E U151F: Automatic Transaxle Assy:
Replacement".
^
2006 model year Sienna Repair Manual, Drive train - Automatic Transmission/Transaxle - "U151E OR U151F: Automatic Transaxle:
Automatic Transaxle Unit: Reassembly".
12.
Install the engine assembly with transaxle.
Refer to TIS:
^
2004 - 2005 model year Highlander Repair Manual, Engine/Hybrid System - Engine Mechanical - "2AZ-FE OR 3MZ-FE: Partial Engine Assy:
Replacement".
^
2006 model year Highlander Repair Manual, Engine/Hybrid System - Engine Mechanical - "2AZ-FE OR 3MZ-FE Engine Mechanical: Engine
Assembly: Installation".
^
2004 - 2005 model year Sienna Repair Manual, Engine/Hybrid System - Engine Mechanical - "3MZ-FE: Partial Engine Assy: Replacement".
^
2006 model year Sienna Repair Manual, Engine/Hybrid System - Engine Mechanical - "3MZ-FE Engine Mechanical: Engine Assembly:
Installation".
13.
Install the transfer drain plug with a NEW gasket.
Torque: 49 N.m (500 kgf.cm, 36 ft.lbf)
14.
Install the transfer case No. 1 plug.
A.
Add oil up to the level 0 - 5 mm (0 -0.20 in.) below the lowest end of the plug hole.
Oil quantity:
0.95 U.S. qts (0.9 L, 0.71 Imp. qts)
NOTE:
Add oil slowly.
B.
Install the No. 1 plug with a NEW gasket.
Torque: 49 N.m (500 kgf.cm, 36 ft.lbf)