toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5968 > < Initial Inspection and Diagnostic Overview|Page 5966
Page 3
background image

3. Approximately 6 seconds after the ignition switch is turned to the ON position, the passenger airbag ON/OFF indicator will be ON/ OFF

depending on the conditions listed.

HINT:
-

The passenger airbag ON/OFF indicator comes on based on the timing chart in order to check the indicator light circuit.

-

When the occupant classification system has trouble, both the SRS warning light and the passenger airbag ON/OFF indicator ("OFF")
come on. In this case, check the DTCs in the "AIRBAG SYSTEM" first.

4. CHECK PASSENGER AIRBAG ON/OFF INDICATOR

a. Turn the ignition switch to the ON position.
b. Check that the passenger airbag ON/OFF indicator ("ON" and "OFF") comes on for approximately 4 seconds, then goes off for 

approximately 2 seconds.

HINT:  Refer to the given table in the previous step regarding the passenger airbag ON/OFF indicator when the ignition switch is turned to the
ON position and approximately 6 seconds have elapsed.

Initial Inspection and Diagnostic Overview|Page 5968 > < Initial Inspection and Diagnostic Overview|Page 5966