Highlander 4WD V6-3.3L (3MZ-FE) Hybrid (2007)
(a)
Using a screwdriver with its tip wrapped with vinyl tape, remove the bearing dust deflector No.1.
NOTICE: Be careful not to damage the steering knuckle.
10. REMOVE FRONT AXLE HUB HOLE SNAP RING
(a)
Using snap ring pliers, remove the front axle hub hole snap ring.
11. REMOVE FRONT AXLE HUB SUB-ASSEMBLY
(a)
Hold the front axle assembly between aluminum plates in a vise.
NOTICE: Do not overtighten the vise.
(b) Using SST, remove the front axle hub subassembly.
SST 09520-00031
(c)
Using SST and a press, remove the bearing inner race (outside) from the front axle hub sub-assembly.