Highlander 4WD V6-3.3L (3MZ-FE) Hybrid (2007)
c. Remove the 2 nuts and oil pump assembly.
INSTALLATION
1. INSTALL OIL PUMP ASSEMBLY
a. Install the oil pump assembly with the 2 nuts.
Torque: 7.0 Nm (71 kgf-cm, 62 inch lbs.)
b. Connect the 2 oil cooler hoses.
c. Connect the oil cooler connector.
2. INSTALL FRONT BUMPER ASSEMBLY
3. ADD AND INSPECT HYBRID TRANSAXLE FLUID