Highlander 4WD V6-3.5L (2GR-FE) (2008)
(c) Put the strips of the tape back to the positions shown in the illustration in order to secure the antenna cord to the roof headlining assembly.
HINT: For the right front corner of the roof headlining assembly, align the marking tape on the antenna cord with the protrusion of the roof
headlining, and wrap tape around the antenna cord and roof headlining assembly once or twice to securely hold them.
2. INSTALL ROOF HEADLINING ASSEMBLY (w/ Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
3. INSTALL ROOF HEADLINING ASSEMBLY (w/o Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
4. INSTALL VISOR HOLDER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL SUN ROOF OPENING TRIM MOULDING (w/ Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
6. INSTALL ROOF HEADLINING TRIM CLIP STOPPER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
7. INSTALL ASSIST GRIP ASSEMBLY (w/ Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
8. INSTALL REAR ASSIST GRIP SUB-ASSEMBLY (w/o Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
9. INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY (w/o Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and