Highlander 4WD V6-3.5L (2GR-FE) (2008)
AUDIO / VISUAL: REAR DOOR SPEAKER: REMOVAL
REMOVAL
1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Removal and Replacement/Disassembly
2. REMOVE REAR DOOR ARMREST UPPER BASE PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Removal and Replacement/Disassembly
3. REMOVE DOOR ASSIST GRIP COVER See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal and
Replacement/Disassembly
4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Removal and Replacement/Disassembly
5. REMOVE REAR SPEAKER ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 bolts and rear speaker assembly.
NOTE: Do not touch the cone part of the speaker.
Installation
AUDIO / VISUAL: REAR DOOR SPEAKER: INSTALLATION
INSTALLATION
1. INSTALL REAR SPEAKER ASSEMBLY
(a) Install the rear speaker assembly with the 3 bolts.
NOTE: Do not touch the cone part of the speaker.
(b) Connect the connector.
2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Removal and Replacement/Reassembly
3. INSTALL DOOR ASSIST GRIP COVER See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal and
Replacement/Reassembly
4. INSTALL REAR DOOR ARMREST UPPER BASE PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Removal and Replacement/Reassembly