Highlander 4WD V6-3.5L (2GR-FE) (2008)
Alarm Module: Service and Repair
Installation
ENGINE IMMOBILISER: CERTIFICATION ECU (w/ Smart Key System): INSTALLATION
INSTALLATION
1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
(a) Install the certification ECU (smart key ECU assembly) with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the connectors.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
6. REGISTER ECU COMMUNICATION ID
NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization See: Antitheft and Alarm Systems/Testing
and Inspection/Programming and Relearning/Engine Immobilizer System (W/ Smart Key System).
7. REGISTER KEY
NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization See: Antitheft and Alarm Systems/Testing
and Inspection/Programming and Relearning/Engine Immobilizer System (W/ Smart Key System).