Highlander 4WD V6-3.5L (2GR-FE) (2008)
A. Disconnect the connector.
B. Remove the 4 bolts and front No.1 speaker assembly.
NOTICE
Do not touch the cone part of the speaker.
10. Remove the bolt 2 nuts and front door check assembly.
11. Install the NEW front door check assembly with the bolt and 2 nuts.
Bolt:
Torque: 27 N*m (275 kgf*cm, 20 ft*lbf)
Nut:
Torque: 8.0 N*m (82 kgf*cm, 71 in*lbf)
12. Reassemble the door in reverse order of removal.
13. Initialize power window control system (for Driver Side).