Highlander 4WD V6-3.5L (2GR-FE) (2008)
Trunk / Liftgate Switch: Testing and Inspection
Back Door Opener Switch
ENGINE HOOD / DOOR: BACK DOOR OPENER SWITCH: INSPECTION
INSPECTION
1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY
(a) Check operation of the opener switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not specified, replace the back door opener switch assembly.
(b) Check operation of the lock switch (w/ Smart Key System).
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not specified, replace the back door opener switch assembly.