Highlander 4WD V6-3.5L (2GR-FE) (2008)
SST: 09950-40011
09951-04020
09952-04010
09955-04011
(b) Using SST, remove the front suspension member body mounting front cushion.
NOTICE:
-
Make sure that the claws of SST are securely hung onto the mounting cushion.
-
Tighten SST slowly and evenly.
-
Be careful as the mounting cushion may fly out.
-
The mounting cushion cannot be reused.
15. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH
(a) Using SST, remove the front suspension member body mounting rear cushion LH.
SST: 09830-10010
09830-01010
09830-01040
09830-01050
SST: 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011
NOTICE:
-
Make sure that the claws of SST are securely hung onto the mounting cushion.
-
Tighten SST slowly and evenly.
-
Be careful as the mounting cushion may fly out.
-
The mounting cushion cannot be reused.
16. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH
HINT: Perform the same procedure as the LH side.
SST: 09830-10010
09830-01010
09830-01040
09830-01050
SST: 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011