toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Entry Lock And Unlock Switch (for Back Door)|Page 10005 > < Entry Lock And Unlock Switch (for Back Door)|Page 10003

Highlander 4WD V6-3.5L (2GR-FE) (2008)

Page 6
background image

                 

12. INSTALL FRONT DOOR SERVICE HOLE COVER See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Removal and

Replacement/Reassembly

                 

13. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Removal and

Replacement/Reassembly

                 

14. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Removal and

Replacement/Reassembly

                 

15. INSTALL COURTESY LIGHT ASSEMBLY See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Removal and

Replacement/Reassembly

                 

16. INSTALL ASSIST GRIP COVER See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Removal and Replacement/Reassembly

                 

17. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Removal and

Replacement/Reassembly

                 

18. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH See: Doors, Hood and Trunk/Doors/Front Door/Service and

Repair/Removal and Replacement/Reassembly

                 

19. CONNECT NEGATIVE BATTERY TERMINAL

HINT: When disconnecting the cable, some systems need to be initialized after the cable is reconnected.  See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization

Entry Lock And Unlock Switch (for Back Door)|Page 10005 > < Entry Lock And Unlock Switch (for Back Door)|Page 10003