Highlander 4WD V6-3.5L (2GR-FE) (2008)
23. REMOVE STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal
24. REMOVE KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System) See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Disassembly
25. REMOVE TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System) See: Steering and Suspension/Steering/Steering Column/Service
and Repair/Disassembly
26. REMOVE STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Disassembly
27. REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Disassembly
28. REMOVE UN-LOCK WARNING SWITCH ASSEMBLY
(a) Remove the un-lock warning switch assembly by pushing up the center part and releasing the 2 claws.
Installation
DOOR LOCK: UNLOCK WARNING SWITCH: INSTALLATION
INSTALLATION
1. INSTALL UN-LOCK WARNING SWITCH ASSEMBLY
(a) Engage the 2 claws to install the un-lock warning switch assembly to the steering lock sub-assembly.
2. INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Reassembly
3. INSPECT STEERING LOCK OPERATION See: Steering and Suspension/Steering/Steering Column/Testing and Inspection/Component Tests
and General Diagnostics/Steering Column Assembly
4. INSTALL STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Reassembly
5. INSTALL KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System) See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Reassembly
6. INSTALL TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System) See: Steering and Suspension/Steering/Steering Column/Service