Highlander 4WD V6-3.5L (2GR-FE) (2008)
(a) Remove the 2 hog rings.
(b) Remove the 15 hog rings and the separate type front seat cushion cover.
Installation
SEAT: FRONT SEAT CUSHION HEATER (for Power Seat): INSTALLATION
INSTALLATION
1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (w/o Seat Cushion Front Edge Adjustment Function)
(a) Using hog ring pliers, temporarily install the separate type front seat cushion cover with 11 new hog rings.
NOTICE:
-
Be careful not to damage the cover.
-
When installing the hog rings, take care to minimize wrinkles as much as possible.
(b) Using hog ring pliers, install the separate type front seat cushion cover with 6 new hog rings.
NOTICE:
-
Be careful not to damage the cover.
-
When installing the hog rings, take care to minimize wrinkles as much as possible.
2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (w/ Seat Cushion Front Edge Adjustment Function)