Highlander 4WD V6-3.5L (2GR-FE) (2008)
/Page-2486008.png)
(a) Engage the 2 guides.
(b) Engage the claw.
(c) Install the front seat cushion shield with the 2 screws.
(d) Engage the 2 hooks.
6. INSTALL RECLINING ADJUSTER RELEASE HANDLE
(a) Engage the claw and install the reclining adjuster release handle.
7. INSTALL FRONT SEAT ASSEMBLY
HINT: Use the same procedure for the RH side and the LH side See: Service and Repair/Front Seat Assembly (for Manual Seat)/Installation.
8. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK
HINT: Use the same procedure for the RH side and the LH side See: Service and Repair/Front Seat Assembly (for Manual Seat)/Installation.
9. INSTALL REAR INNER SEAT TRACK COVER
HINT: Use the same procedure for the RH side and the LH side See: Service and Repair/Front Seat Assembly (for Manual Seat)/Installation.
10. INSTALL REAR OUTER SEAT TRACK COVER
HINT: Use the same procedure for the RH side and the LH side See: Service and Repair/Front Seat Assembly (for Manual Seat)/Installation.
11. INSTALL FRONT INNER SEAT TRACK COVER
HINT: Use the same procedure for the RH side and the LH side See: Service and Repair/Front Seat Assembly (for Manual Seat)/Installation.
12. INSTALL FRONT OUTER SEAT TRACK COVER
HINT: Use the same procedure for the RH side and the LH side See: Service and Repair/Front Seat Assembly (for Manual Seat)/Installation.
13. INSTALL FRONT SEAT HEADREST ASSEMBLY
HINT: Use the same procedure for the RH side and the LH side See: Service and Repair/Front Seat Assembly (for Manual Seat)/Installation.
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When reconnected the cable, some systems need to be initialized. See: Testing and Inspection/Programming and Relearning/Repair
