Highlander 4WD V6-3.5L (2GR-FE) (2008)
Parking Brake Cable: Service and Repair
Installation
PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION
INSTALLATION
1. INSTALL NO. 1 PARKING BRAKE CABLE SUPPORT BRACKET
(a) Install the No. 1 parking brake cable support bracket to the No. 3 parking brake cable assembly.
2. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Install the No. 3 parking brake cable assembly with the 2 bolts and 4 nuts.
Bolt (A) - Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
Bolt (B) - Torque: 39 Nm (397 kgf-cm, 29 ft-lbf)
Nut - Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
(b) Install the No. 3 parking brake cable assembly to the backing plate with the 2 bolts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
3. INSTALL CABLE SUPPORT BRACKET
(a) Install the cable support bracket to the No. 2 parking brake cable assembly.