Highlander 4WD V6-3.5L (2GR-FE) (2008)
2. REMOVE FRONT WHEEL
3. REMOVE NO. 1 ENGINE UNDER COVER
4. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH See: Body and Frame/Spoilers, Flaps, and Air Dams/Mud Flap/Service and
Repair/Removal
5. REMOVE FRONT WHEEL OPENING EXTENSION PAD See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and
Repair/Removal
6. REMOVE FRONT FENDER LINER See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Removal
7. REMOVE FRONT SPEED SENSOR
(a) Disconnect the front speed sensor connector and remove the 2 clamps.
(b) Remove the bolt and No. 2 sensor clamp from the body.
(c) Remove the bolt, No. 1 sensor clamp, and flexible hose together from the shock absorber assembly.
(d) Remove the bolt, resin clamp, and the front speed sensor.